Brushed Brass

Our brass grab bars feature a striking gold tone with a low-reflective satin finish, exuding a luxurious air of elegance. These brushed brass grab bars make a trendy designer statement without being overly flashy.

Brushed brass finishes have been used for decades to create a rich, warm, and timeless feel in bathroom décor. This versatile finish complements a range of aesthetics—from boho-luxe to modern-country—and works with both warm and cool color schemes, reading historic and vintage or crisp and modern depending on the space.

What’s Included

1× stainless steel grab bar
3″ concealed flange covers (twist-on)
Stainless screws for wood-stud mounting
Not included (sold separately), but compatible with most wall anchors: Moen SecureMount®, WingIts®, Delta Anchor®, Toggler® (1/4″ bolts), Solid Mount; drill bits; sealant.

Specs

ADA & ANSI Compliant Stainless Steel Grab Bar — safer, strong, and clean-looking for homes, businesses, and care facilities.

Highlights

1½″ wall clearance
Supports up to 500 lb when properly installed
Concealed-screw design with twist-on covers for a sleek finish
Multiple anchoring points for a secure, easier install
Sizing note: length is measured center-to-center of the flanges. Overall tip-to-tip = listed length + 3″.

Construction

Tubing: 20-gauge #304 stainless steel
Flanges: 15-gauge #304 stainless steel
Covers: 3″ diameter, 22/24-gauge #304 stainless steel

Strength & Safety

Compliance and safety depend on proper installation and anchors, not diameter alone. ADA requires grab bars (and their fasteners/substrates) to withstand a 250-lb force.

Choosing Length, Diameter & Finish

Length

24–36″ — most common for showers/toilets
18–24″ — short reaches or angled assists

Diameter (feel in hand)

1¼″ — slimmer grip; great for smaller hands; sleek residential look
1½″ — fuller grip; more surface contact; common in commercial settings
Both sizes are ADA/TAS-accepted (circular bars 1¼″–2″ OD)
Safety relies on proper installation/anchors (ADA 250-lb requirement)
Clearance is always 1½″ (separate from diameter)

Finish

Match fixtures (stainless pairs with chrome/nickel; matte black for contrast)

Mounting & Placement

Best practice: mount into studs. If studs don’t line up, use a rated hollow-wall anchor (e.g., WingIts®) for your wall type.
Typical horizontal height: 33–36″ AFF (ADA/TAS-informed).
Seal all penetrations and ensure the bar cannot rotate in its fittings.

Shipping & Returns

Ships in 1–2 business days with tracking
Returns accepted unused in original packaging (see full policy)

For full details, see our Shipping Policy and Returns & Refunds Policy.

Care & Warranty

Clean with mild soap + water and a soft cloth; avoid abrasives/bleach
Manufacturer warranty on the bar
If we install, your job is covered by our Lifetime Installation Guarantee

Item added to your cart