White

Our white grab bars are bright and high-visibility. The white finish contrasts sharply against colored or dark walls, adding a clean visual pop that complements a wide range of bathroom and shower palettes.

The high contrast enhances visibility in low light, improving safety and ease of use. This pure white color can also blend seamlessly with white porcelain tile for an understated look—while maintaining all the practical, anti-slip benefits of a purpose-built grab bar.

What’s Included

1× stainless steel grab bar
3″ concealed flange covers (twist-on)
Stainless screws for wood-stud mounting
Not included (sold separately), but compatible with most wall anchors: Moen SecureMount®, WingIts®, Delta Anchor®, Toggler® (1/4″ bolts), Solid Mount; drill bits; sealant.

Specs

ADA & ANSI Compliant Stainless Steel Grab Bar — safer, strong, and clean-looking for homes, businesses, and care facilities.

Highlights

1½″ wall clearance
Supports up to 500 lb when properly installed
Concealed-screw design with twist-on covers for a sleek finish
Multiple anchoring points for a secure, easier install
Sizing note: length is measured center-to-center of the flanges. Overall tip-to-tip = listed length + 3″.

Construction

Tubing: 20-gauge #304 stainless steel
Flanges: 15-gauge #304 stainless steel
Covers: 3″ diameter, 22/24-gauge #304 stainless steel

Strength & Safety

Compliance and safety depend on proper installation and anchors, not diameter alone. ADA requires grab bars (and their fasteners/substrates) to withstand a 250-lb force.

Choosing Length, Diameter & Finish

Length

24–36″ — most common for showers/toilets
18–24″ — short reaches or angled assists

Diameter (feel in hand)

1¼″ — slimmer grip; great for smaller hands; sleek residential look
1½″ — fuller grip; more surface contact; common in commercial settings
Both sizes are ADA/TAS-accepted (circular bars 1¼″–2″ OD)
Safety relies on proper installation/anchors (ADA 250-lb requirement)
Clearance is always 1½″ (separate from diameter)

Finish

Match fixtures (stainless pairs with chrome/nickel; matte black for contrast)

Mounting & Placement

Best practice: mount into studs. If studs don’t line up, use a rated hollow-wall anchor (e.g., WingIts®) for your wall type.
Typical horizontal height: 33–36″ AFF (ADA/TAS-informed).
Seal all penetrations and ensure the bar cannot rotate in its fittings.

Shipping & Returns

Ships in 1–2 business days with tracking
Returns accepted unused in original packaging (see full policy)

For full details, see our Shipping Policy and Returns & Refunds Policy.

Care & Warranty

Clean with mild soap + water and a soft cloth; avoid abrasives/bleach
Manufacturer warranty on the bar
If we install, your job is covered by our Lifetime Installation Guarantee

Item added to your cart